How to clean the silica gel ice lattice?
Silica gel ice lattice is non-toxic and harmless. It is produced with silica gel raw materials of food grade stainless steel, but it should be applied after high-temperature disinfection when it is bought back for the first time. When using the silica gel ice lattice for the first time, it shall be steamed and sterilized in 100 ℃ boiling water, and must be cleaned after each application.
Silica gel ice lattice is made of silica gel raw material of food grade stainless steel, which is non-toxic and harmless. However, it must be disinfected and sterilized before application. Silica gel material is heat-resistant, so it can be scalded with hot water or steamed in high-temperature boiling water immediately for disinfection and sterilization.
1、Does the ice cube have to be washed
As a household ice making equipment, many good friends don't pay much attention to it. They put it in the refrigerator after each use. In fact, the ice lattice should be cleaned regularly.
1. It is often necessary to clean the ice lattice on time because the ice produced by the ice lattice needs to be put into the mouth. Although the refrigeration temperature of the refrigerator is low and it is not easy to grow bacteria, it is better to wash it as much as possible in order to better environmental hygiene.
2. Generally, ice lattices are used more in summer. Some families will put them away in other seasons. When they are taken down in summer, they should not only clean them, but also sterilize them before they can be put into the refrigerator for reuse.
3. In addition to making ice, many silica gel ice lattices used at home can also be put into the oven to make cakes and poured into drinks to make jelly. Generally, it is not proposed to be universal with ice lattices, but if they want to be universal, they must be cleaned up every time they are used up and make ice again.
Generally speaking, it is necessary to clean the ice lattice on time. How to wash the ice lattice?
2、How to clean silica gel ice lattice
1. How to clean silica gel ice lattice for the first time
Silica gel ice lattice is made of silica gel raw material of food grade stainless steel, which is non-toxic and harmless. However, it must be disinfected and sterilized before application. Silica gel material is heat-resistant, so it can be scalded with hot water or steamed in high-temperature boiling water immediately for disinfection and sterilization.
2. Daily cleaning method of silica gel ice lattice
If you are diligent, you can clean the silica gel ice lattice every time you use it, or you can clean it on time after a period of time. Soak the silica gel ice lattice in cold water with appropriate detergent for 10-30 minutes, and then clean it with soft sponge or flexible pure cotton cloth. After cleaning, place it in natural ventilation and dry it quickly, and then apply it again; If you don't need it, put it in the packing box and drawer cabinet.

3、What are the common problems in cleaning silica gel ice lattice
1. Soft raw materials shall be selected to clean the silica gel ice lattice. Raw materials such as sanding paper, sand powder, hard steel wire brush and steel wire ball shall not be cleaned with water, otherwise the silica gel ice lattice will be scratched or damaged.
2. The vast majority of ice lattices are not too large. The indoor space is small, so they are not easy to dry and irritable, and are very easy to grow bacteria. Therefore, after washing, whether it is applied again or stored, they need to be dried to ensure that they can be reused after drying.
3. After the silica gel ice lattice is washed, it is not necessary to put it outside for a long time. Due to the slight electrostatic adsorption on the surface of the silica gel material, it will adhere to the fine particles or floating dust in the air.
1. Wash the ice lattice with a lot of cold water.
2. Then dip a small amount of detergent or detergent with soft sponge or soft cotton cloth and rub it evenly on the ice lattice.
3, then use cold water to clean up the detergent foam on silica gel.
4. After cleaning, place it in a natural ventilation, quickly dry it, put it in a storage box and store it.
Note: do not use unsmooth abrasive paper, sand powder, aluminum spherical, hard wire brush or very unsmooth cleaning equipment on the surface to prevent scratches or damage to the abrasive tools. Due to slight electrostatic adsorption on the surface of silica gel material, it will adhere to fine particles or floating dust in the air. Therefore, it is not easy to expose the ice lattice to the air for a long time after washing.